Important safety regulations
The following safety requirements are the responsibility of the owner (the landlord), and where we are to manage the property, they are also ours as agents. Therefore to protect all interests we ensure full compliance with the appropriate regulations, at the owner's expense.
Gas Appliances & Equipment
Annual safety check: Under the Gas Safety (Installation and Use) Regulations 1998 all gas appliances and flues in rented accommodation must be checked for safety within 12 months of being installed, and thereafter at least every 12 months by a competent engineer (e.g. a CORGI registered gas installer).
Maintenance: There is a duty to ensure that all gas appliances, flues and associated pipework are maintained in a safe condition at all times.
Records: Full records must be kept for at least 2 years of the inspections of each appliance and flue, of any defects found and of any remedial action taken.
Copies to tenants: A copy of the safety certificate issued by the engineer must be given to each new tenant before their tenancy commences, or to each existing tenant within 28 days of the check being carried out.
Electrical Appliances & Equipment
There are several regulations relating to electrical installations, equipment and appliance safety, and these affect landlords and their agents in that they are 'supplying in the course of business'. They include the Electrical Equipment (Safety) Regulations 1994, the Plugs and Sockets Regulations 1994, the 2005 Building Regulation - 'Part P, and British Standard BS1363 relating to plugs and sockets. Although with tenanted property there is currently no specific legal requirement for a qualified electrician to carry out an inspection and issue a safety certificate (as exists in the case of gas appliances), it is now widely accepted in the letting industry that the only safe way to ensure safety, and to avoid the risk of being accused of neglecting your 'duty of care', or even of manslaughter is to arrange such an inspection and certificate.
Furniture & Furnishings
The Furniture and Furnishings (Fire) (Safety) Regulations 1988 (amended 1989, 1993 & 1996) provide that specified items supplied in the course of letting property must meet minimum fire resistant standards. The regulations apply to all upholstered furniture, and beds, headboards and mattresses, sofa-beds, futons and other convertibles, nursery furniture, garden furniture suitable for use in a dwelling, scatter cushions, pillows, and non-original covers for furniture. They do not apply to antique furniture or furniture made before 1950, bed clothes including duvets, loose covers for mattresses, pillowcases, curtains, carpets or sleeping bags. Therefore all relevant items as above must be checked for compliance, and non-compliant items removed from the premises. In practice, most (but not all) items which comply must have a suitable permanent label attached. Items purchased since 1.3.90 from a reputable supplier are also likely to comply.
General Product Safety
The General Product Safety Regulations 1994 specify that any product supplied in the course of a commercial activity must be safe. In the case of letting, this would include both the structure of the building and its contents. Recommended action is to check for obvious danger signs - leaning walls, broken glass, sharp edges etc., and also to leave operating manuals or other written instructions about high risk items, such as hot surfaces, electric lawnmowers, etc. for the tenant.